Isothiazolinones (CMIT/MIT)
Isothiazolinones (CMIT/MIT) is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect of Isothiazolinones (CMIT/MIT) is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones (CMIT/MIT) can quickly inhibit their growth, thus leading to death of these microbes. Isothiazolinones (CMIT/MIT) has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation.
Isothiazolinones (CMIT/MIT) can mix with chlorine and most cation, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent.
Isothiazolinones (CMIT/MIT) is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc.
Specification of Product
Product Name : Isothiazolinones (CMIT/MIT)

2-methyl-4-thiazoline-3-ketone 5-chloro- methyl-4-thiazoline-3-ketone
Molecular weight: 115.16
CAS No.: 26172-55-4
CAS No.: 2682-20-4
Isothiazolinones (CMIT/MIT) Quality Standard:
Grade I Grade II
Appearance Amber transparent liquid Light yellow or light green transparent liquid
Active content % 14.0-15.0 2.0 min
pH (as it) 2.0-4.0 2.0-5.0
Density (20℃)g/cm3 1.24-1.32 1.03 min
CMI/MI (wt %) 2.5-3.4 2.5-3.4
Packing
200L plastic drum, IBC(1000L), customers' requirement.
Storage
Storage for 10 months in shady room and dry place.
Isothiazolinones (CMIT/MIT) Usage
When used as sludge stripper for grade II, the dosage of 150-300mg/L is preferred, when used as boicide, the dosage of 80-100mg/L is preferred, and charges every 3-7 days. No used together with oxidative fungicidal such as chlorine, and no used in cooling water system containing sulfur. When used together with quaternary amine, the effect will be better. When used as industrial fungicide, the dosage of 0.05-0.4% is preferred.