Sodium Diethylhexyl Sulfosuccinate
Hosea Chem® has been supplying Sodium Diethylhexyl Sulfosuccinate（Penetrant OT, Penetrating agent T）(CAS 1639-66-3) with high quality and competitive price for many years, covering most of the European, America, Middle East... Send Inquiry
Product Description
Sodium Diethylhexyl Sulfosuccinate
This product is an anionic surfactant, it has properties of rapid penetration, homogeneity, wetting, emulsification and better frothing. It is intolerant with strong acid, strong alkali, heavy metals and reductant.
This product is soluble in water, lower alcohol, benzene, ccl4 and kerosene oil solvents. The solution is milk white, pH (1% water solution) is 5.0-7.0.
This product can penetrate rapidly and homogeneously, and has good effect at temperature lower than 40℃ and pH 5-10. The treated fabric is stable even temperature acidic and alklic condition changed. It’s widely used textile & dyeing, pesticide emulsification, tanning and mineral separation.
Specification of Product
Product Name : Sodium Diethylhexyl Sulfosuccinate
Penetrant OT
Penetrating agent T
Molecular weight: 444.56
CAS No.: 1639-66-3
Sodium Diethylhexyl Sulfosuccinate Quality Standard:
Appearance Colorless to yellow viscous liquid
pH (1% water solution) 5.0-7.0
Penetrating (1% water solution) /s 5.0 max
Solid content % 50.0 min
Packing
200L plastic drum, IBC(1000L), customers' requirement.
Storage
Storage for 24 months in shady room and dry place.
Methods and used in
(1) Cotton wool dyeing: 2g/l of this product is heated from room temperature to 95℃, 20 min dehydration, then rolling drift after cooling, cleaning, dechloridation.
(2) Cotton wool desize：cotton wool is pretreated at 20℃ for 5 min, then other additives can be added, it is heated to 80-90℃ in 20-30 min, and is treated for 45 min. When cotton shell is removed, it can be dyed. The preferred dosage is 2-3g/l.
(3) Cotton wool desize, bleach and dyeing: The direct or active dye which is oxidant tolerance is selected. The method is the same as 2, dyeing is added directly.
(4) Scouring of adhesive: addition of penetrant t in scouring of adhesive can reduce 2 h and decrease damage to silk.
(5) Usage in asbestos: for froth asbestos, the preferred dosage is 10-15% of asbestos; for dustless asbestos, the preferred dosage is 15-20% of asbestos.
(6) Usage in tanning: for dry tanning, this product is usually mixed with jfc, and the preferred dosage is 0.5-1.0%. For tanning additives, the preferred dosage is 10%.
Attentions
(1) Sodium Diethylhexyl Sulfosuccinate has good penetrating performance under 40℃, it may decompose with alkali at high temperature condition. Thus, the fabric is recommended to be treated with Sodium Diethylhexyl Sulfosuccinate under 40℃ before heating up. For the production of asbestos products, there is no influence to the product by making the asbestos to pulp under 40℃ then heat to 200~300℃.
(2) This product is intolerant with strong alkali. Diluted with water first.
(3) This product is anionic surfactant, it cannot mixed with cationic surfactant or cationic dye.
(4) When raw blanks are being scoured and bleached, the slurry is recommended to be desized completely first to ensure the penetration effect.
(5) If too many froth is occurred, antifrother such as octanol, tributyl phosphate can be used.